1 files changed, 0 insertions, 466 deletions
diff --git a/man5/termcap.5 b/man5/termcap.5
deleted file mode 100644
index f2ba89373..000000000
--- a/man5/termcap.5
+++ /dev/null
@@ -1,466 +0,0 @@
-.\" Copyright (c) 1993 Michael Haardt (michael@moria.de),
-.\"     Fri Apr  2 11:32:09 MET DST 1993
-.\"
-.\" SPDX-License-Identifier: GPL-2.0-or-later
-.\"
-.\" Modified formatting Sat Jul 24 17:13:38 1993, Rik Faith (faith@cs.unc.edu)
-.\" Modified (extensions and corrections)
-.\"   Sun May  1 14:21:25 MET DST 1994 Michael Haardt
-.\"   If mistakes in the capabilities are found, please send a bug report to:
-.\"   michael@moria.de
-.\" Modified Mon Oct 21 17:47:19 EDT 1996 by Eric S. Raymond (esr@thyrsus.com)
-.TH termcap 5 (date) "Linux man-pages (unreleased)"
-.SH NAME
-termcap \- terminal capability database
-.SH DESCRIPTION
-The termcap database is an obsolete facility for describing the
-capabilities of character-cell terminals and printers.
-It is retained only for compatibility with old programs;
-new programs should use the
-.BR terminfo (5)
-database and associated libraries.
-.PP
-.I /etc/termcap
-is an ASCII file (the database master) that lists the capabilities of
-many different types of terminals.
-Programs can read termcap to find
-the particular escape codes needed to control the visual attributes of
-the terminal actually in use.
-(Other aspects of the terminal are
-handled by
-.BR stty (1).)
-The termcap database is indexed on the
-.B TERM
-environment variable.
-.PP
-Termcap entries must be defined on a single logical line, with \[aq]\e\[aq]
-used to suppress the newline.
-Fields are separated by \[aq]:\[aq].
-The first field of each entry starts at the left-hand margin,
-and contains a list of names for the terminal, separated by \[aq]|\[aq].
-.PP
-The first subfield may (in BSD termcap entries from 4.3BSD and
-earlier) contain a short name consisting of two characters.
-This short name may consist of capital or small letters.
-In 4.4BSD, termcap entries this field is omitted.
-.PP
-The second subfield (first, in the newer 4.4BSD format) contains the
-name used by the environment variable
-.BR TERM .
-It should be spelled in lowercase letters.
-Selectable hardware capabilities should be marked
-by appending a hyphen and a suffix to this name.
-See below for an example.
-Usual suffixes are w (more than 80 characters wide), am
-(automatic margins), nam (no automatic margins), and rv (reverse video
-display).
-The third subfield contains a long and descriptive name for
-this termcap entry.
-.PP
-Subsequent fields contain the terminal capabilities; any continued
-capability lines must be indented one tab from the left margin.
-.PP
-Although there is no defined order, it is suggested to write first
-boolean, then numeric, and then string capabilities, each sorted
-alphabetically without looking at lower or upper spelling.
-Capabilities of similar functions can be written in one line.
-.PP
-Example for:
-.nf
-.PP
-Head line: vt|vt101|DEC VT 101 terminal in 80 character mode:\e
-Head line: Vt|vt101-w|DEC VT 101 terminal in (wide) 132 character mode:\e
-Boolean: :bs:\e
-Numeric: :co#80:\e
-String: :sr=\eE[H:\e
-.fi
-.SS Boolean capabilities
-.nf
-5i	Printer will not echo on screen
-am	Automatic margins which means automatic line wrap
-bs	Control-H (8 dec.) performs a backspace
-bw	Backspace on left margin wraps to previous line and right margin
-da	Display retained above screen
-db	Display retained below screen
-eo	A space erases all characters at cursor position
-es	Escape sequences and special characters work in status line
-gn	Generic device
-hc	This is a hardcopy terminal
-HC	The cursor is hard to see when not on bottom line
-hs	Has a status line
-hz	Hazeltine bug, the terminal can not print tilde characters
-in	Terminal inserts null bytes, not spaces, to fill whitespace
-km	Terminal has a meta key
-mi	Cursor movement works in insert mode
-ms	Cursor movement works in standout/underline mode
-NP	No pad character
-NR	ti does not reverse te
-nx	No padding, must use XON/XOFF
-os	Terminal can overstrike
-ul	Terminal underlines although it can not overstrike
-xb	Beehive glitch, f1 sends ESCAPE, f2 sends \fB\[ha]C\fP
-xn	Newline/wraparound glitch
-xo	Terminal uses xon/xoff protocol
-xs	Text typed over standout text will be displayed in standout
-xt	Teleray glitch, destructive tabs and odd standout mode
-.fi
-.SS Numeric capabilities
-.nf
-co	Number of columns
-dB	Delay in milliseconds for backspace on hardcopy terminals
-dC	Delay in milliseconds for carriage return on hardcopy terminals
-dF	Delay in milliseconds for form feed on hardcopy terminals
-dN	Delay in milliseconds for new line on hardcopy terminals
-dT	Delay in milliseconds for tabulator stop on hardcopy terminals
-dV	Delay in milliseconds for vertical tabulator stop on
-	hardcopy terminals
-it	Difference between tab positions
-lh	Height of soft labels
-lm	Lines of memory
-lw	Width of soft labels
-li	Number of lines
-Nl	Number of soft labels
-pb	Lowest baud rate which needs padding
-sg	Standout glitch
-ug	Underline glitch
-vt	virtual terminal number
-ws	Width of status line if different from screen width
-.fi
-.SS String capabilities
-.nf
-!1	shifted save key
-!2	shifted suspend key
-!3	shifted undo key
-#1	shifted help key
-#2	shifted home key
-#3	shifted input key
-#4	shifted cursor left key
-%0	redo key
-%1	help key
-%2	mark key
-%3	message key
-%4	move key
-%5	next-object key
-%6	open key
-%7	options key
-%8	previous-object key
-%9	print key
-%a	shifted message key
-%b	shifted move key
-%c	shifted next key
-%d	shifted options key
-%e	shifted previous key
-%f	shifted print key
-%g	shifted redo key
-%h	shifted replace key
-%i	shifted cursor right key
-%j	shifted resume key
-&0	shifted cancel key
-&1	reference key
-&2	refresh key
-&3	replace key
-&4	restart key
-&5	resume key
-&6	save key
-&7	suspend key
-&8	undo key
-&9	shifted begin key
-*0	shifted find key
-*1	shifted command key
-*2	shifted copy key
-*3	shifted create key
-*4	shifted delete character
-*5	shifted delete line
-*6	select key
-*7	shifted end key
-*8	shifted clear line key
-*9	shifted exit key
-@0	find key
-@1	begin key
-@2	cancel key
-@3	close key
-@4	command key
-@5	copy key
-@6	create key
-@7	end key
-@8	enter/send key
-@9	exit key
-al	Insert one line
-AL	Insert %1 lines
-ac	Pairs of block graphic characters to map alternate character set
-ae	End alternative character set
-as	Start alternative character set for block graphic characters
-bc	Backspace, if not \fB\[ha]H\fP
-bl	Audio bell
-bt	Move to previous tab stop
-cb	Clear from beginning of line to cursor
-cc	Dummy command character
-cd	Clear to end of screen
-ce	Clear to end of line
-ch	Move cursor horizontally only to column %1
-cl	Clear screen and cursor home
-cm	Cursor move to row %1 and column %2 (on screen)
-CM	Move cursor to row %1 and column %2 (in memory)
-cr	Carriage return
-cs	Scroll region from line %1 to %2
-ct	Clear tabs
-cv	Move cursor vertically only to line %1
-dc	Delete one character
-DC	Delete %1 characters
-dl	Delete one line
-DL	Delete %1 lines
-dm	Begin delete mode
-do	Cursor down one line
-DO	Cursor down #1 lines
-ds	Disable status line
-eA	Enable alternate character set
-ec	Erase %1 characters starting at cursor
-ed	End delete mode
-ei	End insert mode
-ff	Formfeed character on hardcopy terminals
-fs	Return character to its position before going to status line
-F1	The string sent by function key f11
-F2	The string sent by function key f12
-F3	The string sent by function key f13
-\&...	\&...
-F9	The string sent by function key f19
-FA	The string sent by function key f20
-FB	The string sent by function key f21
-\&...	\&...
-FZ	The string sent by function key f45
-Fa	The string sent by function key f46
-Fb	The string sent by function key f47
-\&...	\&...
-Fr	The string sent by function key f63
-hd	Move cursor a half line down
-ho	Cursor home
-hu	Move cursor a half line up
-i1	Initialization string 1 at login
-i3	Initialization string 3 at login
-is	Initialization string 2 at login
-ic	Insert one character
-IC	Insert %1 characters
-if	Initialization file
-im	Begin insert mode
-ip	Insert pad time and needed special characters after insert
-iP	Initialization program
-K1	upper left key on keypad
-K2	center key on keypad
-K3	upper right key on keypad
-K4	bottom left key on keypad
-K5	bottom right key on keypad
-k0	Function key 0
-k1	Function key 1
-k2	Function key 2
-k3	Function key 3
-k4	Function key 4
-k5	Function key 5
-k6	Function key 6
-k7	Function key 7
-k8	Function key 8
-k9	Function key 9
-k;	Function key 10
-ka	Clear all tabs key
-kA	Insert line key
-kb	Backspace key
-kB	Back tab stop
-kC	Clear screen key
-kd	Cursor down key
-kD	Key for delete character under cursor
-ke	turn keypad off
-kE	Key for clear to end of line
-kF	Key for scrolling forward/down
-kh	Cursor home key
-kH	Cursor hown down key
-kI	Insert character/Insert mode key
-kl	Cursor left key
-kL	Key for delete line
-kM	Key for exit insert mode
-kN	Key for next page
-kP	Key for previous page
-kr	Cursor right key
-kR	Key for scrolling backward/up
-ks	Turn keypad on
-kS	Clear to end of screen key
-kt	Clear this tab key
-kT	Set tab here key
-ku	Cursor up key
-l0	Label of zeroth function key, if not f0
-l1	Label of first function key, if not f1
-l2	Label of first function key, if not f2
-\&...	\&...
-la	Label of tenth function key, if not f10
-le	Cursor left one character
-ll	Move cursor to lower left corner
-LE	Cursor left %1 characters
-LF	Turn soft labels off
-LO	Turn soft labels on
-mb	Start blinking
-MC	Clear soft margins
-md	Start bold mode
-me	End all mode like so, us, mb, md, and mr
-mh	Start half bright mode
-mk	Dark mode (Characters invisible)
-ML	Set left soft margin
-mm	Put terminal in meta mode
-mo	Put terminal out of meta mode
-mp	Turn on protected attribute
-mr	Start reverse mode
-MR	Set right soft margin
-nd	Cursor right one character
-nw	Carriage return command
-pc	Padding character
-pf	Turn printer off
-pk	Program key %1 to send string %2 as if typed by user
-pl	Program key %1 to execute string %2 in local mode
-pn	Program soft label %1 to show string %2
-po	Turn the printer on
-pO	Turn the printer on for %1 (<256) bytes
-ps	Print screen contents on printer
-px	Program key %1 to send string %2 to computer
-r1	Reset string 1 to set terminal to sane modes
-r2	Reset string 2 to set terminal to sane modes
-r3	Reset string 3 to set terminal to sane modes
-RA	disable automatic margins
-rc	Restore saved cursor position
-rf	Reset string filename
-RF	Request for input from terminal
-RI	Cursor right %1 characters
-rp	Repeat character %1 for %2 times
-rP	Padding after character sent in replace mode
-rs	Reset string
-RX	Turn off XON/XOFF flow control
-sa	Set %1 %2 %3 %4 %5 %6 %7 %8 %9 attributes
-SA	enable automatic margins
-sc	Save cursor position
-se	End standout mode
-sf	Normal scroll one line
-SF	Normal scroll %1 lines
-so	Start standout mode
-sr	Reverse scroll
-SR	scroll back %1 lines
-st	Set tabulator stop in all rows at current column
-SX	Turn on XON/XOFF flow control
-ta	move to next hardware tab
-tc	Read in terminal description from another entry
-te	End program that uses cursor motion
-ti	Begin program that uses cursor motion
-ts	Move cursor to column %1 of status line
-uc	Underline character under cursor and move cursor right
-ue	End underlining
-up	Cursor up one line
-UP	Cursor up %1 lines
-us	Start underlining
-vb	Visible bell
-ve	Normal cursor visible
-vi	Cursor invisible
-vs	Standout cursor
-wi	Set window from line %1 to %2 and column %3 to %4
-XF	XOFF character if not \fB\[ha]S\fP
-.fi
-.PP
-There are several ways of defining the control codes for string capabilities:
-.PP
-Every normal character represents itself,
-except \[aq]\[ha]\[aq], \[aq]\e\[aq], and \[aq]%\[aq].
-.PP
-A \fB\[ha]x\fP means Control-x.
-Control-A equals 1 decimal.
-.PP
-\ex means a special code.
-x can be one of the following characters:
-.RS
-E Escape (27)
-.br
-n Linefeed (10)
-.br
-r Carriage return (13)
-.br
-t Tabulation (9)
-.br
-b Backspace (8)
-.br
-f Form feed (12)
-.br
-0 Null character.
-A \exxx specifies the octal character xxx.
-.RE
-.TP
-i
-Increments parameters by one.
-.TP
-r
-Single parameter capability
-.TP
-+
-Add value of next character to this parameter and do binary output
-.TP
-2
-Do ASCII output of this parameter with a field with of 2
-.TP
-d
-Do ASCII output of this parameter with a field with of 3
-.TP
-%
-Print a \[aq]%\[aq]
-.PP
-If you use binary output,
-then you should avoid the null character (\[aq]\e0\[aq])
-because it terminates the string.
-You should reset tabulator expansion
-if a tabulator can be the binary output of a parameter.
-.TP
-Warning:
-The above metacharacters for parameters may be wrong: they document Minix
-termcap which may not be compatible with Linux termcap.
-.PP
-The block graphic characters can be specified by three string capabilities:
-.TP
-as
-start the alternative charset
-.TP
-ae
-end the alternative charset
-.TP
-ac
-pairs of characters.
-The first character is the name of the block graphic
-symbol and the second characters is its definition.
-.PP
-The following names are available:
-.PP
-.nf
-+	right arrow (>)
-,	left arrow (<)
-\&.	down arrow (v)
-0	full square (#)
-I	lantern (#)
--	upper arrow (\[ha])
-\&'	rhombus (+)
-a	chess board (:)
-f	degree (')
-g	plus-minus (#)
-h	square (#)
-j	right bottom corner (+)
-k	right upper corner (+)
-l	left upper corner (+)
-m	left bottom corner (+)
-n	cross (+)
-o	upper horizontal line (-)
-q	middle horizontal line (-)
-s	bottom horizontal line (_)
-t	left tee (+)
-u	right tee (+)
-v	bottom tee (+)
-w	normal tee (+)
-x	vertical line (|)
-\[ti]	paragraph (???)
-.fi
-.PP
-The values in parentheses are suggested defaults which are used by the
-.I curses
-library, if the capabilities are missing.
-.SH SEE ALSO
-.BR ncurses (3),
-.BR termcap (3),
-.BR terminfo (5)